BGMRT - EPOXY POLYAMIDE PRIMER, COMPONENT B

  • MSDS: BGMRT
  • Manufacturer: STERLING LACQUER MFG CO
  • Product Name: EPOXY POLYAMIDE PRIMER, COMPONENT B
  • National Stock Number: 8010-01-120-5004
Product Identification

Product ID:EPOXY POLYAMIDE PRIMER, COMPONENT B
MSDS Date:01/01/1987
FSC:8010
NIIN:01-120-5004
Kit Part:Y
MSDS Number: BGMRT

Responsible Party
STERLING LACQUER MFG. CO.
3150 BRANNON AVE
ST LOUIS, MO 63139-1422
US

Cage: 22181

Contractor
STERLING LACQUER MFG
ST LOUIS, MO 63139-1422 US

Cage: 22181

Ingredients

AROMATIC HYDROCARBONS

Fraction By Weight: 47%

ACGIH TLV: 200PPM


ALCOHOLS (TYPE NOT SPECIFIED)

Fraction By Weight: 53%

ACGIH TLV: 100 PPM

Hazards

Effects of Overexposure:EYE & SKN CONTCT;PRIMARY IRRIT.INHAL:IRRIT OF
RESPIR TRACT AND/OR NARCOSIS.

First Aid

First Aid:EYE CONTACT:FLUSH W/WATER F/15 MINUTES.TAKE TO PHYSICIAN.SKIN
CONTACT:WASH W/SOAP & WATER.NOTIFY PHYSICIAN.INHAL:FRESH AIR &
TREATMENT FOR EFFECTS OF SOLVENT FUMES.DR. CONSULTATION:DO NOT
INDUCE VOMIT ING IF INGESTED.

Fire Fighting

Flash Point:45 F CC/7 C CC
Lower Limits:1.0
Upper Limits:11
Extinguishing Media:CO*2, FOAM OR DRY CHEM(NFPA)CLASS B EXTINGUISHERS
Fire Fighting Procedures:DO NOT USE WATER.
Unusual Fire/Explosion Hazard:ISOLAT FR HEAT,ELECTR EQPMT,SPARKS & OPN
FLAME.CLOS CONTNRS MAY EXPLOD WHN EXPOS TO EXTREME HEAT(SUP

Accidental Release

Spill Release Procedures:REMOV ALL SOURCES OF IGNITION (FLAMES,HOT
SURFACES & ELECTRSTATIC OR FRICTIONAL SPARKS). AVD BREATHING
VAPORS.VENTILATE AREA.REMOV W/INNER & ABSORBENT & NON SPARKING
TOOLS

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120 F. STORE LG
QUANTIT IN BLDGS DESIGN & PROTECTED FOR STORAGE OF NFPA CL 1B
FLAMMBL LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY. WHEN HANDLINGS LG VOLUMES
GROUND CONTNRS WHN POURING & AVOID FREE FALL. POURING IN EXCESS OF
A FEW INCHES.

Exposure Controls

Respiratory Protection:APPRVD BUR OF MNES DEVICE F/TYPE
AREA(OUTDR,RESTRICT,VENT OR CONFINE
Ventilation:LOC EXHAUST-PROVID GEN. DILUT OR LOC EXHAUST VENTIL IN
(SUP)
Protective Gloves:FOR PRLNG CONTC
Eye Protection:AGNST LIWD SPLASHES
Other Protective Equipment:PRVNT PROLNGED SKN CONTCT TO CONTAMINATED
CLOTHING.
Supplemental Safety and Health
VENTIL;VOLUME PATTERN TO KEEP TLV BELOW ACCEPTABLE LIMIT.KEY1:F3.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:179
Vapor Pres:31.
Vapor Density:HEAV
Spec Gravity:0.854
Evaporation Rate & Reference:2.1 BUTYL ACETATE
Solubility in Water:SLIGHT
Appearance and Odor:AMBER LIQUID,AROMATIC HYDROCARBON ODOR
Percent Volatiles by Volume:83

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSE IAW LOCAL,STATE & FEDERAL
REGULATIONS.INCINERATE IN APPROVED FACILITY. DO NOT INCINERATE
CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.